bios güncelleme lütfen bi yardım ya

by_recep
11-10-2008, 03:31   |  #1  
OP Yıllanmış Üye
Teşekkür Sayısı: 0
219 mesaj
Kayıt Tarihi:Kayıt: Tem 2007

Arkadaşlar daha öncede buna benzer bi konu açtım format falan atmama rağmen bişi değişmedi. Bende floppy yok o yüzden windows üzerinden bios güncellleme yapmak istiyorum. Fakat önceden update yaptığım şekilde yapamıyorum. Live update online üzerinden yapmaya çalıştım ondada tam bios güncellemesi aranırken programı kapat diye hata veriyor. Sizce nedir bu ya..

Kapalı Hesap (34907)
11-10-2008, 09:06   |  #2  
Kapalı Hesap
Teşekkür Sayısı: 5
1,440 mesaj
Kayıt Tarihi:Kayıt: Eyl 2006

Arkadaşım
cevap bu forumda linki takit ediniz.


by_recep
11-10-2008, 11:14   |  #3  
OP Yıllanmış Üye
Teşekkür Sayısı: 0
219 mesaj
Kayıt Tarihi:Kayıt: Tem 2007

hatırladım geçen sorduğumdada aynı cevap gelmişti bana.
Şöyle bişi var. Orda anlatılanlar çok güzel eline sağlık. Ama ben diyorum ki daha önce siteden indirilen dosyada afud.exe yi çalıştırdığımda direk update ediyordu şimdi ise şöyle bir ekran çıkıyor.


Burada tıkanıyorum. Live update online kullandıımda ise bios versiyonu ararken uygulama sonlandırma sorunu çıkıyor. Tamam belki windows üzerinden hallolucak ama ben neden windows üzerinden update edemediğimi merak ediyorum.

by_recep
12-10-2008, 13:33   |  #4  
OP Yıllanmış Üye
Teşekkür Sayısı: 0
219 mesaj
Kayıt Tarihi:Kayıt: Tem 2007

neyse disket sürücü taktım internette araştırdım fakat benim internetten indirdiğim bios dosyalarıyla falan ilgili hiçbişi bulamadım. Benim anakartta amibios kullanılmış galiba. MSI ' nın kendi sitesinden indirdiğim bios klasöründe
Afud408.exe ve
A7345IMS.190
diye iki dosya var. başlangıç disketi oluşturduğumda diskette 856KB yer kaldı.yukarıdaki dosyalarda 1120KB yer kaplşıo bunuda not olarak soylıym ddim.
Şimdi disketten nasıl update yapıcam.
Bi sitede şöle bi yazı var ama ordaki dosyayı MSI 'ın sitesinden bulamadım.

1. Bir sistem disketi yaratın. Internet çekeceğiniz dosyayı diskete kopyalayın. Aynı diskete yine MSI#146;nin sitesinden çektiğiniz AMIFL634.EXE dosyasını diskete kopyalayın.

2. Yeni BIOS dosyasının adı şu şekilde olmalı : A54MS10.ROM. Bu dosyanın bir kopyasını başka bir diskette saklayın ve dosya ismini AMIBOOT.ROM olarak değiştirin. Acil durumlarda işimize yarayacak çünkü.

3. Sistem disketi ile sistemi açın ve şunları yazın:
AMIFL634 xxxxxx.rom

xxxxx.rom olan yere BIOS dosyasının ismini yazacaksınız.

4. #147;Y#148; tuşuna bastığınızda, güncelleme işlemi başlayacaktır. Programlama işlemi başarılı olursa, #147;Flash EEPROM Program Successful#148; mesajı görünecektir. Bir tuşa bastığınızda sistem yeniden başlayacaktır. İşte bu kadar.

Son Düzenleme: by_recep ~ 12 Ekim 2008 13:39
man on the moon
12-10-2008, 17:46   |  #5  
man on the moon avatarı
Yıllanmış Üye
Teşekkür Sayısı: 2
2,151 mesaj
Kayıt Tarihi:Kayıt: Kas 2006

live update 3 vista üzerinden çalışıyor denedin mi?

man on the moon
12-10-2008, 17:50   |  #6  
man on the moon avatarı
Yıllanmış Üye
Teşekkür Sayısı: 2
2,151 mesaj
Kayıt Tarihi:Kayıt: Kas 2006

1- indirdiğin dosyayı c:\test klasörüne çıkart
başlangıç disketi ile bilgisayarı başlat
sonrasında ise
C: <enter>
cd\test <enter>
C:\test> adsfi719 BIOS file bu satırı kendi bios dosyana göre ayarla.

hadi bu da olmadı diyelm
Flashing the BIOS for Non-FAT file system
1. Know your model number
a. Open your case and look for the MS-XXXX number on the motherboard between the PCI slots, also check the version number that is written there as well. (some motherboards are named like K8N Diamond, make sure you have the right version number)
b. Boot up your system & take a look at the top left screen during POST, you should see something like “W7100NMS V1.1 021705” This means the board is MS-7100 with BIOS version 1.1
Hint: Many systems are clearing this message very fast, the bios version is then unreadable, and you can either press “PAUSE” or disable the “Quick Boot” in the BIOS setup.

3. Download the BIOS that matches your motherboard AND version number (some motherboards are named like K8N Diamond; make sure you have the right version number). BIOS can be found according to the CPU type of your board like if your CPU is AMD 939 type then look here

(AMD%20K8)
if you cannot find the BIOS that matches your board, try here <;;

4. Extract the file you have downloaded to a floppy (not the win ME/98 startup floppy) by double clocking the file in windows mode and supplying the path a:
5. Boot the computer using windows ME or windows 98 startup disk. It must be one of these! A plain boot disk will not be good enough.
If you do not have Windows ME or 98 to create the floppy you can make one on a friend's computer.

6. When boot is done there will be a message on the screen showing:"Diagnostic tools were successfully loaded to drive" followed by a single letter.
This letter is the letter assigned to the RAMDRIVE. This RAMDRIVE is a virtual drive in the system memory and can be accessed and controlled like any other drive with DOS commands such as:
MD - Make Directory
Copy - copy a file
Delete - Delete a file

There is one important difference which is that being in the system memory this drive is wiped once the computer is restarted or shut down.

7. Replace the startup floppy with the one containing the flash utility and bios ROM files previously extracted in windows.

8. Copy the 2 files to the RAMDRIVE by using the DOS command copy.
Here is an example, in this example the flash utility is AWFL865.EXE ,the ROM file is  W7100NMS.110  and the RAMDRIVE letter assignment is D

copy awfl865.exe d:copy w7100nms.110 d:
9. Change the current working directory to the RAMDRIVE root directory, with the example case of the RAMDRIVE being drive D this is done by simply done with the command d:

10. Execute the flash utility with the ROM file as a command line argument, with this example:
awfl865 w7100nms.110

If you wish to save the current bios you must specify the full path a:\filename. Specifying only a file name will save the bios to the RAMDRIVE which will be wiped after restarting the computer and the file will not be saved.

a:\bios.old is an example of the correct way to save the bios.

11. Reboot your system when prompted

12. If your system doesn't boot after you flashed, please refer to the BIOS recovery method as described


Son Düzenleme: man on the moon ~ 12 Ekim 2008 17:59
by_recep
12-10-2008, 18:51   |  #7  
OP Yıllanmış Üye
Teşekkür Sayısı: 0
219 mesaj
Kayıt Tarihi:Kayıt: Tem 2007

adsfi719 yerinemi bios dosyasının ismini yazcam yoksa yanınamı?
Alttakindende hiçbişi anlamadım valla.

man on the moon
12-10-2008, 20:51   |  #8  
man on the moon avatarı
Yıllanmış Üye
Teşekkür Sayısı: 2
2,151 mesaj
Kayıt Tarihi:Kayıt: Kas 2006

evet ama alttaki diyorki non fat sistems.
indirdiğin bios dosyasını kaliteli bir diskete çıkart bu disket win98/me başlangıç disketi olmalı...
sistem doğru başladığında "Diagnostic tools were successfully loaded to drive"
mesajını alırsın.
bilgisayarında bir ram drive oluşur bu nun sürücü harfi hdd ve optik disklerden sonraki harftir.
disketteki bios dosyalarını bu ram drive a kopyala
bu harf ne ise aşağıdaki satırda d: yerine gelecek olan harf.
copy awfl865.exe d:copy w7100nms.110 d:
bundan sonrası ise üstte yapılan gibi.. c yerine ram sürücü nün harfi olacak.

Son Düzenleme: man on the moon ~ 12 Ekim 2008 20:53
tknsyen
31-08-2012, 01:24   |  #9  
tknsyen avatarı
Yıllanmış Üye
Teşekkür Sayısı: 44
443 mesaj
Kayıt Tarihi:Kayıt: Ağu 2012

anakartın markası ve biosunun modeli ne genelde anakart driver cdsinin içinde anakart biosu güncelleme programı vardır cdsini bulup birde ordan güncelleme yapsan