windows 7 starter - windows 7 yardım!!

radioSES
07-07-2011, 09:50   |  #1  
OP Taze Üye
Teşekkür Sayısı: 0
3 mesaj
Kayıt Tarihi:Kayıt: Tem 2011

Merhaba arkadaşlar yeni bi netbook aldım. aldım actım dırek windows 7 starter yuklu... hicbisey de yapılmıor nefret ettm resmen:D
ben onu silip normal windows 7 yuklemek istiyorum napmalıyım?
ve bilgisayarım kaldırır mı 2gm ram 1.6 işlemci

Tekno_Loji
07-07-2011, 09:56   |  #2  
Tekno_Loji avatarı
Yıllanmış Üye
Teşekkür Sayısı: 35
1,677 mesaj
Kayıt Tarihi:Kayıt: Ağu 2005

Home Premium kur, yetiyor. Bende netbook kullanıyorum aldığımda XP yüklüydü ben USB yoluyla Win7 Home Premium kurdum...

Son Düzenleme: Tekno_Loji ~ 07 Temmuz 2011 09:57
radioSES
07-07-2011, 09:59   |  #3  
OP Taze Üye
Teşekkür Sayısı: 0
3 mesaj
Kayıt Tarihi:Kayıt: Tem 2011

ya işte nasıl windows 7 starter ı kaldırıp premium u kuracagımı blmyorum:(

bybarut
07-07-2011, 09:59   |  #4  
Yıllanmış Üye
Teşekkür Sayısı: 1
938 mesaj
Kayıt Tarihi:Kayıt: May 2007

Netbook olduğuna göre optik sürücü de yoktur malum usbdisc ile format atıp istediğiniz sürümü yüklemeyi deneyebilirsiniz
https://www.chip.com.tr/konu/Windows-7-yi-USB-den-kurun_12496.html
***windows 7 de tüm sürümleri görmek için "eicfg_remover" adlı uygulama ile iso içindeki "ei.cfg uygulamasını devre dışı bırakıp tüm sürümleri görüp yükleme sansınız var.***

Son Düzenleme: bybarut ~ 07 Temmuz 2011 10:03
Kapalı Hesap (200174)
07-07-2011, 10:00   |  #5  
Kapalı Hesap
Teşekkür Sayısı: 9
3,759 mesaj
Kayıt Tarihi:Kayıt: Ara 2010
Alıntı: Tekno_Loji  
Home Premium kur, yetiyor. Bende netbook kullanıyorum aldığımda XP yüklüydü ben USB yoluyla Win7 Home Premium kurdum...
evet kaldırmasına kaldırır ama gün geçtikçe programmlar çoğalınca yavaşlama olacaktır işlemcin yetersiz gibi görünüyor
intelin celeron işlemcisimi ?

Tekno_Loji
07-07-2011, 10:03   |  #6  
Tekno_Loji avatarı
Yıllanmış Üye
Teşekkür Sayısı: 35
1,677 mesaj
Kayıt Tarihi:Kayıt: Ağu 2005

USB kullanarak kurarsın (en az 4GB USB gerekli) ama biraz uğraştırır.

Örneğin şu verdiğim video'da nasıl kurulabileceği hakkında görüntü var. İzleyerek yapabilirsin.

Install Windows Vista and Windows 7 from a USB driveInstall Windows Vista and Windows 7 from a USB drive
Install Vista-Windows 7 from USB Flash Drive
*Please note: Depending on your Windows Install disk or images size, you will need a USB drive that matches or exceeds the install size. Example: A retail Windows Vista SP1 disk is 4.3gbs in size, you will need a USB larger than 4gb.
*These instructions were written on a Vista machine, same rules apply in XP versions except you do not have to open the Command Prompt as the Admin.
•Start?All Programs?Accessories, Right click on command promt and choose Run as administrator

•At command line type diskpart and hit enter

•At DISKPART command, type list disk

•It will show you a list of all available mountable disks on your computer. Be very SURE you are choosing the correct drive, so you do not wipe the wrong disk.

•Type select disk 1

•Then type clean

•Type create partition primary

•Type select partition 1
•Type active

•Type format fs=fat32, it will then count up the percentage to 100%

•Then type assign, Now please verify the drive letter assigned to your USB drive in your my computer drive list.  

•Type exit

•You will now be back at the command prompt. This is where you will type the xcopy command to copy the contents of the vista or windows 7 disk to your USB drive. In my case, I have a windows 7 ISO or CD image that is located on my local C: , I will extract the iso using WinRAR to a directory located on my C: . If you burn this image to a disk, you will point the xcopy command to the drives letter. Example, if your DVD-ROM is D: and your USB is E:, you will type xcopy d:\*.* /s/e/f e:\ (without quotes)

•I have the extracted iso in a folder located at c:\Windows7. I will type xcopy c:\Windows7\*.* /s/e/f e:\ (without quotes) This will then start the full copy process of the install files to your USB drive. Please wait for this to complete, and show ### File(s) copied, and place you back at your command prompt. You can now type exit and close the cmd window.

•It is now time to install the operating system from the USB drive. Please reboot the computer with the USB drive in the PC. Most newer PCs and laptops made within the past 3-4 years will have the ability to boot to a USB flash drive.  Two main ways to do this. One, if your first initial boot screen has the option for a boot menu, sometimes when hitting esc or f9, depending on your computer, use the boot screen to show available bootable hardware. Two, go into your BIOS settings, by hitting f1 or Del, again depending on your computer, and setting the BIOS to boot to the USB drive by setting the boot order. Now if you choose to set the BIOS boot order after the FIRST restart on the install, you must set the hard drive as the first boot device in the BIOS. If you do not, you will then boot again directly into the install USB to start all over. If you have option 1 available, this is only temporary, and it will set it at the first time and revert back to the previous settings after the install restarts itself.

•Install the OS, leave the USB drive in through the whole install.

***I used a Patriot Xporter XT 4GB Flash drive for my install medium. This is a high speed USB drive, and when using other USB drives, your results may vary. Results in speed, and motherboard boot compatibility.

1. önce c dizinine bir tane Windows7 adında bir klasör yarat ve Win7 cd'si içindeki bütün dosyaları bir klasör içine at...

2. Sonra başlata cmd yaz msdos penceresini aç (veya video'daki gibi yaparak açabilirsin)

3. Açılan msdos penceresine önce diskpart yazıyorsun...

4.Sonra list disk yazarak Bilgisayarındaki tüm harddisk, usb sürücülerin görünüyor...

5. Burada USB sürücünü seçiyorsun. Örneğin video'daki kullanıcı select disk 1 yazarak 3.820 MB'lık (yaklaşık 4GB) USB sürücüsünü seçti. Sende seçerken buna dikkat et. Bu çok önemli buraya dikkat et!!!

6.clean yazarak USB'deki tüm bilgileri sildi (Önemli dosyaların varsa USB içinde, Dosyaların bir kopyasını al)

7. create partition primary yazıyorsun

8. select partition 1 yaz....

9. active yaz...

10. format fs=fat32 quick yazarak USB'yi fat 32 olarak biçimlendiriyorsun..

11. assign yaz...

12. Son olarak exit yazıp bu bölümden çıkıyorsun....

13. Sonrada xcopy c:\Windows7\*.* /s/e/f e:\ yazıp Windows7 klasöründeki tüm dosyaları USB'ye atıyorsun. (Burada en son yazılan e:\ Bilgisayar tarafından atanılan USB sürücünün harfi, sende farklı bir harf seçmiş olabilir buna dikkat et!!!)

14. Bu işlemde bittikten sonra bütün Windows7 CD'si içindeki bilgiler USB'ye aktarılmış olacak. Sen bilgisayarı kapatıp açarken Bios ekranından önce boot ayarını USB olarak değiştireceksin. (Belki değiştirmeden de görebilir). Sonra Win7 kurulumu karşına çıkacak. Win7 kurulumunu biliyorsundur sanırım. Aynı XP,Vista gibi...

radioSES
07-07-2011, 10:05   |  #7  
OP Taze Üye
Teşekkür Sayısı: 0
3 mesaj
Kayıt Tarihi:Kayıt: Tem 2011

verdgn linkten download tusuna bastm fakat trial yani deneme surumu oıldgu fln yazıyodu 90 gunluk:S
sonra sıkıntı olmasın?

Kapalı Hesap (215956)
08-07-2011, 02:22   |  #8  
Kapalı Hesap
Teşekkür Sayısı: 0
92 mesaj
Kayıt Tarihi:Kayıt: Haz 2011

Kardeşim hiç bootable flash bellekle filan uğraşma. DVD sürücüsü olan bi bilgisayar aracılığıyla Windows 7 DVD'si içindeki dosyaların tümünü flash belleğe kopyala daha sonra netbookun açıkken program kuruyormuş gibi flash bellek üzerinden kurulumu başlat özel yükleme yap rahatına bak. Windows 7 kurulumunun en kolay yönlerinden birisi boot gerektirmemesidir zaten neden kendimizi yoralım ki.

Son Düzenleme: Kapalı Hesap (218367) ~ 08 Temmuz 2011 02:23
frhtcvlgl
08-07-2011, 22:44   |  #9  
Yeni Üye
Teşekkür Sayısı: 0
35 mesaj
Kayıt Tarihi:Kayıt: Tem 2011

bence sistemin windows 7 icin biraz hafif kalmıs ama windows 7 kurmak istersen
buradan resimli yardım http://www.formatatma.org/?&Bid=867134
buradan videolu yardım http://www.formatatma.org/?&Bid=867162